Firing Supplies

Cracks and chips in kiln refractory can be permanently sealed with AMACO® Kiln Cement. 1 lb jar is a premixed liquid. The prepared cement is ready for immediate use. When mixed with coarse grog or pieces of refractory, cement may be used to repair large holes in firebrick. WARNING: Do not allow direct contact with elements and electrical wiring.

Use with firebrick and insulating firebrick. Air setting. Maximum service temperature 2900°F. Maximum service temperature, degrees F: 2900 Type of brick: IFB Lb required brushing coat 100 sq. ft. 20 Recommended water % for trowel 29 Recommended water % for dipping 50 Example: 50 lbs of dry mortar for troweling x 29% water = 14.5 lbs of water Recommended Manufacturers Mixing Instructions: Mix the water and dry mortar for 5 minutes, using a paddle mixer with at least 45 RPM. Place in an airtight...