Misc

Add AMACO® Gum Solution to glazes to improve their brushability and slow their drying time which results in a more even and consistent application. Old, thick glazes can be brought back to their original creamy consistency by thinning the glaze with water first, then adding about a tablespoon of AMACO® Gum Solution, or as much as needed to obtain good brushability without drag. AMACO® Gum Solution will prevent glazes from drying fast and cracking. After using AMACO® Underglaze Pencils and...

Mend-a-Mold Directions 1. Shake well before using 2. Dampen broken mold with water. 3. Apply Mend-a-Mold to broken edges. 4. Wipe off excess with damp sponge to prevent Mend-a-Mold from drying in mold cavity. 5. Apply pressure with rubber band or mold strap while Mend-a-Mold sets. 6. Allow 1 hour before handling repaired mold 4-5 hours to fully cure. Product Volume: 1 fluid ounce ...

Glaze Fix helps aid suspension in your glazes that have separated or dead-panned. Use it the same as Darvan 7, adding 1-2 tsp per pint.

Talisman Rotary Sieve is a rotary mouli type sieve for sieving large batches of glaze or slip.The Rotary Sieve has a tapered, plastic body which fits firmly on any round container. The handle extension allows it to rest on extra large containers.Push-in screens with moulded rubber rims are interchangeable. Stainless steel screens available in the following meshes: 10#, 20#, 30#, 40#, 50#, 60#, 80#, 100#, 120#, 150# and 200#.Either wet or dry materials can be sieved quickly. For example, dry...

Add to any brand of glaze. The Western Glaze suspender will help reverse hard settling of liquid brushing glazes. Break up the settled or hard dry glaze with a dull butter knife, or clay tool. Add water and suspender. Shake, mix, or stir settled glaze vigorously until re-suspended. Add one or two teaspoons glaze suspender per pint of liquid glaze is normally all it takes. Continue to shake and stir vigorously until glaze suspender dissolves. Repeat if necessary. We also recommend the mixers...

Clay Mender is an “enhanced slip” that is intended to be used to repair and/or add attachments to greenware or bisque.